Advertisement
CLEANING
Wash any removable parts of the refrigerator interior, and
exterior with mild detergent and warm water. Wipe dry.
Do not use harsh cleaners on these surfaces.
Do not use razor blades or other sharp instruments,
which can scratch the appliance surface when removing
adhesive labels. Any glue left from the tape can be
removed with a mixture of warm water and mild deter-
gent, or touch the residue with the sticky side of tape
already removed. Do not remove the serial plate.
_To
allow door to
close and seal properly,
DO NOT let
food packages
extend past the front
of shelves.
Shelf Front
DOOR
REMOVAL
If door must be removed •
1. Gently lay refrigerator on its back, on a rug or blanket.
2. Remove two base screws and base panel. Remove wire
clips on bottom of cabinet.
3. Remove bottom hinge screws.
4. Remove plastic top hinge cover.
5. Remove screws from top hinge.
6. Remove top hinge from cabinet.
7. Remove door and bottom hinge from cabinet.
8. To replace door, reverse the above order and securely
tighten all screws to prevent hinge slippage.
• Coverfoods and wipe containers dry before placing
them in the refrigerator. This cuts down on moisture
build-up inside the unit.
• Organize the refrigerator to reduce door openings.
Remove as many items as needed at one time and
close the door as soon as possible.
COOL
DOWN
PERIOD
For safe food storage, allow 4 hours for the refrigerator to
cool down completely. The refrigerator will run continuously
for the first several hours.
TEMPERATURE
CONTROL
The temperature control is located inside the refrigerator.The
temperature is factory preset to provide satisfactory food
storage temperatures. However, the temperature control is
adjustable to provide a range d temperatures for your
personal satisfaction. If a colder temperature is desired, turn
the temperature control knob toward COLDEST and allow
several hours for temperatures to stabilize between adjustments.
Cold Control
TILT=OUT
SHELF
This shelf is located inside on the refrigerator door and
provides additional storage space. To access an item, tilt
top of "basket" shelf down.
•
Install the refrigerator in the coolest
part of the room, out of direct sunlight
and away from heating ducts or
/"' _'!,_
registers. Do not place the refrigerator
next to heat- producing appliances
_ _'_-..'_ _z_"
_' "" '_
such as a range, oven or dishwasher.
,,
,.
• Level the refrigerator so the door
close tightly.
"
..........
• Do not overcrowd the refrigerator or block cold air
vents. Doing so causes the refrigerator to run
longer
and use more energy. Shelves should not be lined with
aluminum foil, wax paper or paper toweling. Liners
interfere with cold air circulation, making the refrigerator
less efficient, which could cause food spoilage.
Tilt=Out Shelf
Advertisement
