Bosch SHE43F16UC/59 Manual page 20

Canceling or changing a cycle
To cancel or change a cycle, open the dishwasher door
far enough to expose the control buttons then press and
hold the"Cancel Reset" buttons for 3 seconds.
Close the door and wait until the dishwasher completes
the cycle (approx. 1 min). Open the door and press the
ON/OFF button. You may now begin a new cycle.
Dishware Drying
At the end of the cycle the dishwasher will stop and a
period of condensation drying will follow. After drying,
the cycle is complete and depending on your model:
• the"Clean" light will illuminate OR
• the cycle completion signal will sound OR
• the countdown display will show "0" OR
• When the cycles are complete, the "Sanitized"
indicator on your dishwasher control panel will
illuminate. However, if your household water supply
is to hot your dishwasher's heating time may be
reduced, and the Sanitized indicator may not show.
20