Removing, Reversing And Replacing - Kenmore 795.73966300 Use & Care Manual

REMOVING, REVERSING (OPTIONAL) AND
REPLACING REFRIGERATOR DOORS
TOOLS NEEDED: 10mm hex-head socket wrench,
No. 2 Phillips screwdriver, flat-head screwdriver, 1/4-inch
open-end wrench, fiat 2-inch putty knife.
IMPORTANT: Before you begin, turn the refrigerator OFF
and unplug it. Remove food and any adjustable door or
utility bins from doors.
HOWTO REVERSE DOOR OPENING DIRECTION
(when converting from the left-opening type to right-
opening type)
1. Removing Freezer Door
Remove the top hinge cover (1).
Before
Before
After
................................ I
i --oI
z........................... J
o Remove the 3 bolts and lift off the top hinge (2).
Lift the freezer door (3) slightly and remove it.
- Pry off the cover (4) using a flat-head screwdriver and
attach it on the right.
° Remove the screw (5), remove (6), (7), (8), Reverse (6)
(7), (8) as illustrated exactly and attach it to the left
of the door.
2. Removing Refrigerator Door
Before After
, Remove the bolts and Phillips screw (9) lift off the
middle hinge (10).
Lift the door (11) slightly and remove it.
, Take offthe base grille (12).
After
o Remove the pin (15) from right side on hinge (20)
to left side on hinge (20).
* Remove screw (17) on left side of the base.
, Loosen 3 bolts (18) on right side of the base.
Remove the bottom hinge (20) and replace it on the
left side of the base.
o Attach screw (17) on right side of the base.
Loosen 4 screws (22) and reverse (16) and (23) as
illustrated exactly and attach it to the left side
• Pry off the cover (24) using a fiat-head screwdriver and
attach it on the right.
3. Moving Freezer Handle
o Remove cap (3) and cover (4).
Loosen the screws (1) (two on the top
and two on the bottom), take off the handle (2), and
attach it on the right.
Attach the removed cover (4) on the left.
o Attach cap (3) on the top right side.
Before