Installation Checklist - Kenmore 153.326030 Owner's Manual

Installation Instructions (cont'd)
Installation Checklist
ls the fuse or circuit breaker size correct as shown in the
chart in the "Product Specifications" section?
Are the wires from the circuit breaker or fuse service to the
water heater's junction box on the correct wire size
"Pr-'_u ...... (g, a uge)
as shown in the chart in the ,,u ct _pecmcauons sec-
tion?
ls the new temperature-pressure relief valve properly
installed, and piped to an adequate drain? See "_l_mperature-
Pressure Relief Valve" section.
ls the water heater completely filled with water? See "Filling
the Water Heater" instructions in the "Installation
Instructions section.
Will a water leak damage anything? See "Facts to Consider
About the Location" section.
TEMPERATURE-PRESSURE !_ ..... _'_
RELIEF VALVE
HOT WATER
DISCHARGE
_Do not cap or plug.
rovide a 6" air gap
between the end of the
pipe and drain.)
• Are the cold and hot water lines connected to the water
heater correctly? See "Water Piping" instructions in the
"Installation Instructions" section.
Is there adequate clearance for maintenance around the
water heater?
Do you need to call your electric company to check your
wiring?
DRAIN VALVE
FLOOR DRAIN
COLD WATER
3=NDUIT
MODEL RATING PLATE
12