Jenn-Air JED8130 User Manual page 4

R
ISURFACE CONTROLS
Use to turn on the surface elements. An
infinite choice of heat settings is
available from Lo to Hi. The knobs can
be set on or between any of the set-
tings.
SETTING THE
1. Place pan on surface element.
2. Push in and turn the knob in either
direction to the desired heat setting.
3. After cooking, turn knob to OFF.
Remove pan.
SURFACE OONTROL KNOBS
Refer to illustrations for knob placement.
A
B
C
D
E
F
Exhaust Fan & Element (left)
Exhaust Fan
Exhaust Fan
Exhaust Fan & Element (right)
Left Rear Element
Left Front Element
Right Rear Element
Right Front Element
Far Right Rear Element
Far Right Front Element
• The function of the left and center bays of the JED8345 is the same as described in
the above chart.
• There is no grilling on the right side of the JED8345 or JED8130.
• Knobs B & C control the fan only and are not required for grilling.
MODEl. JED8 i 30 & JED8230
A C
B D
MODEL JED8345
!°i
ir
A C
B D
3