Minute Timer - Jenn-Air W188 Use And Care Manual

Minute Timer
IMPORTANT: This timer does not control the oven; it only operates a beeper. It
can be used to remind you when a period, up to 99 minutes and 99 seconds,
expires. It can be used independently of any other oven activity and can be set
anytime.
To set minute timer:
1. Touch MINUTE TIMER PAD.
Indicator Words ENTER and TIME will blink and all O's will be displayed for 8
seconds to allow setting numbers. (If more than 8 seconds elapse between
touching MINUTE TIMER PAD and first numeral, the MINUTE TIMER PAD
must be touched again to set the numbers.)
o o. oq) o,.,,o,
2. Touch NUMBER PADS for time desired.
For example: touch 3 0 0 0 for 30 minutes or touch 3 0 for 30
seconds.
IMPORTANT: This is the only function where time entered is in minutes and
seconds. Minutes are to left of colon and seconds to right of colon.
I or[ o s
3. Touch START PAD.
This starts the countdown that will be displayed. Countdown will have display
precedence over anything else programmed, such as oven temperature or
probe temperature. At end of time set, signal will beep five times.
After timer runs out, display will return to time of day or whatever is
programmed on control panel.
4. To cancel MINUTE TIMER, touch MINUTE TIMER PAD to stop beeping or to
cancel timer at any time. CANCEL-OFF PAD can also be used to stop the
beeping; however, this will also cancel any other cooking function.
11