For Service - Jenn-Air JGC9536BDS User Manual

EFORE YOU FOR sERvicE
SURFACE BURNER FALLSTO LIGHT.
• Checkto be sure plug issecurely inserted
into receptacle.
• Check or re-set circuit breaker. Check
or replace fuse.
• Check power supply.
• Check to be sure burner is correctly
rated for your kind of gas.
• Check to be sure burner ports or ignition
ports are not clogged.
• Check to be sure ignitor is dry and
clicking. Burner will not light if ignitor is
damaged, soiled or wet. If ignitor doesn't
click, turn control knob OFF.
• Check to be sure burner cap iscorrectly
seated on the burner base.
SURFACE BURNER FLAME LIFTS
OFF PORTS.
• Check to be sure a pan issitting on the
grate above.
• Contact an authorized servicer.
THE FLAME IS UNEVEN.
• Burner ports may be clogged.
• Flame may need to be adjusted. Contact
an authorized servicer.
SURFACE BURNER FLAME IS
YELLOW iN COLOR.
• Contact an authorized servicer.
• Some yellow tips on the flame are
acceptable when using LP gas.
GLASS-CERAMIC
SURFACE SHOWS WEAR.
1,Metal marks.
• Do not slide metal pans across top.
When cool, clean with Cooktop
Cleaning Creme. See pg. 8.
2,Brown streaks and specks.
• Spills were not removed promptly.
Surface was wiped with soiled cloth
or sponge.
3oAreaswith a metallic sheen.
• Mineral deposits from water and food.
4,Pitting or flaking.
• Sugary boilovers that were not
removed promptly. See pg. 8.
|GNITER CONTINUES TO CLICK.
• Be sure ignitors are dry.
9