Download Print this page

Jenn-Air JGS8850ADS User Manual page 18

Gas slide-in range
Hide thumbs Also See for JGS8850ADS:

Advertisement

Available languages

Available languages

JARE
CLEANING,
CONToI
• If over time, racks do not slide out easily,
wipe the rack edge and rack support with
a smallamount of vegetableoff to restore
easeof movement, then wipe off excess
oil. Likewise, placeone drop of vegetable
off on rack guides.
NOTE: Removeoven racks during a clean
cycle.If racksare lee in the oven,it may impair
Functionand they will discolor.
STAINLESS
STEEL
• DO NOT USEANY CLEANING PROD-
UCT
CONTAINING
CHLORINE
BLEACH.
• ALWAYS WIPE WITH THE GRAIN
WHEN CLEANING.
• Daily Cleaning/Ught Soil m Wipe with
one of the following - soapy water, white
vinegar/water solution, Formula 409 Glass
and Surface Cleaner"_ or a similar glass
cleaner - usinga spongeor soft cloth. Rinse
and dry. To polish and help prevent finger-
prints, follow with Stainless Steel Magic
Spray (Jenn-Air Model A912, Part No.
20000008)**.
Moderate/Heavy
Soil m Wipe with one
of the following - BonAmi, Smart Cleanser,
or Soft Scrub";- usinga dampspongeor soft
cloth. Rinseand dry. Stubborn soils maybe
removed with a damp Scotch-Brite* pad;
rub evenlywith the grain. Rinseand dry. To
restore luster and remove streaks, follow
with StainlessSteel MagicSpray.
Discoloration
_ Using a dampsponge or
soft cloth, wipe with Cameo StainlessSteel
Cleaner"_,Rinse immediately and dry. To
remove streaks and restore luster, follow
with StainlessSteel MagicSpray.
STORAGE
DRAWER - PAINTED
ENAMEL
• When cool, wash with warm soapy water,
rinse and dry. Never wipe a warm or hot
surfacewith a dampcloth asthis may damage
the surfaceand may causea steamburn.
• For stubborn soil usemildly abrasivedean-
ing agentssuchasbakingsodapasteor Bon
Ami/' Do not useabrasive,causticor harsh
cleaningagents such as steel woo[ padsor
oven cleaners.These products will scratch
or permanently damagethe surface.
NOTE: Use dry towel or cloth to wipe up
spills, especially acidic or sugary spills.
Surface may discolor or dull if soil is not
immediately removed. This is especially
important for white surfaces.
* Brand names for cleaning products are registered trademarks of the respective manufacturers.
*_ To order direct, ca[[ 1-800-688-8408,
INTENANCE]
OVEN DOOR
TO REMOVE:
I. When cool, open the oven door to the
first stop position (opened about four
inches).
2. Grasp door ateach side. Do not usethe
door handle to lift door.
3. Lift up evenly until door clears hinge
arms.
TO REPLACE:
2.
o
Grasp door at each side.
Align slots in the door with the hinge
arms on the range.
Slide the door clown onto the hinge
arms until the door iscompletely seated
on the hinges. Push down on the top
corners of the door to completely seat
door on hinges. Door should not ap-
pear crooked,
17
NOTE: The oven door on a new range may
feel "spongy" when it is closed. This is
normal and will decrease with use.
OVEN
WINDOW
TO PROTECT
THE
OVEN
DOOR
WINDOW:
I. Do not use abrasivecleaningagents such
assteel wool scouring padsor powdered
cleaners asthey may scratch the glass.
2. Do not hit the glass with pots, pans,
furniture, toys, or other objects.
3. Do not close the oven door until the oven
racks are in place.
Scratching, hitting, jarring or stressing the
glass may weaken its structure causing an
increased risk of breakageat a later date.

Advertisement

loading