JBL SCS135 System Owner's Manual page 10

0 P ERAT I 0 N
.... _ove the Master Power ..... is eot sending program When the _Auto/On" switch
....... switch (marked" Power" O) material to the subwoofer, O is switched to the "On"
to the %" (On) position to use the subwoofer will be in positiQn, the subwoofer will
the subwoofen The SCS135 standby mode. When the sub- remain on, whether or not
subwoofet will automatically woofer senses an audio signal, program material is £1aying,
turn itself on or go into it will automatically ture itself If you will be away from
standby (sleep) mode when on: Ifthe subwoofer does home for an extended period
left in the standby mode not sense a signal after of time, or if [he subwoofer
("Auto/On" switch _ in _he approximately twenty minutes, wiii not be used, switch the
"Auto" position}, When your it will automatically go into Master Power switch 401 to
receiver or amplifier is off, or standby mode, the Off position,
HIGHL[VEL _ SUHWOOFE£
- LINELEVEL IN
÷ L - - R ÷ _ L_EL
OUT _ _ _ _ LEE @ Aem_ roy _._
IM_R _JT _NECI S_PEDWI£E 0 _EO1_) Sff_ERII_F411_AL
SUB135
@
Z_Z_ FUSE AC _20V~60_ 25A_25_V 200 Wat[s
?Y_ET
O
49
Volume
Volume can be adjusted
using the Subwoofer Level
Control _(above), as shown
below,
Subwoofer
©
Level
©
i