Key To Symbols; Symbols - Husqvarna 128CD Operator's Manual

KEY TO SYMBOLS
Symbols
WARNING: Clearing saws, brush- A
cutters and trimmers can be dan- /|_
gerous! Careless or incorrect use / _ '_
can result in serious or fatal
injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions
before using the machine.
Always wear: @
• Hearing protection
• Approved eye protection
Max. speed of output shaft, rpm d
max
10000 rprn
Watchricochets.OUt for thrown objects and ,i_
The operator of the machine
must ensure, while working,
that no persons or animals
come closer than 50 feet
(15 meters).
Arrows which show limits for
handle positioning.
Always wear approved protective
gloves.
U
Wear sturdy, non-slip boots.
Only use non-metallic, flexible
cutting attachments, i.e. trimmer
heads with trimmer line.
Only intended for trimmer heads, i_
Use unleaded or quality leaded \_
gasoline and two-stroke oil
mixed at a ratio of 2% (1:50).
Other symbols/decals on the machine
refer to special certification requirements
for certain markets.
Stop the engine by pushing
and holding the stop switch
in the STOP position until the
engine stops before carrying
out any checks or maintenance.
Regular cleaning is required.
Visual check.
Approved eye protection must
always be used.
545186844 Rev. 5 2/17/09 English-3