Husqvarna 128CD Operator's Manual page 14

ASSEMBLY
Fitting the trimmer guard and
trimmer head (Model 128CD)
0
• Fit the correct trimmer guard (A) for use
with the trimmer head. Hook the trimmer
guard/combination guard onto the fitting on
the shaft and secure with the wing nut (B).
\\\ jB "IL_/I
c....... ÷ ÷
• Fit the dust cup (C) on the shaft. The nut
must be completely covered by the dust
cup.
• Hold the dust cup with a wrench to pre-
vent the shaft from rotating.
• Screw the trimmer head (D) onto the
shaft.
• To dismantle, follow the instructions in
the reverse order.
545186844 Rev. 5 2/17/09 English-14