Husqvarna LOGTH2448T Operator's Manual page 5

PRODUCT SPECIFICATIONS
Gasoline Capacity 4 Gallons
and Type: Unleaded Regular
Oil Type SAE 30 (above 32°F)
(API-SG-SL): SAE 5W30
(below 32°F)
Oil Capacity: VV! Filter: 4.0 Pints
W/O Filter: 3.75 Pints
Spark Plug: Champion QC12YC
(Gap: .030")
Ground Speed Forward: 0-5.5
Reverse: 0-2.4
Charging System: 16 Amps @ 3600 RPM
Battery: Amp/Hr: 35
Min, CCA: 280
Case size: UIR
Blade Bolt Torque: 45-55 Ft. Lbs.
CONGRATULATIONS on your purchase
of a new tractor. It has been designed,
engineered and manufactured to give
you the best possible dependability and
performance.
Should you experience any problem you
cannot easily remedy, please contact a
qualified service center. We have com-
petent, well-trained technicians and tile
proper tools to service or repair this trac-
tor.
Please read and retain this manual. The
instructions will enable you to assernble
and maintain your tractor properly. Always
observe the "SAFETY RULES",
CUSTOMER RESPONSIBILITIES
o Read and observe the safety rules.
• Follow a regular schedule in main-
taining, caring for and using your tractor,,
° Follow the instructions under"Mainte-
nance" and "Storage" sections of this
owner's manual.
,_WARNING: This tractor is equipped
with an internal combustion engine and
should not be used on or near any unim-
proved forest-covered, brush-covered or
grass-covered land unless the engine's
exhaust system is equipped with a spark
arrester meeting applicable local or state
laws (if any)_ If a spark arrester is used, it
should be maintained in effective working
order by the operator.
In the state of California the above is
required by law (Section 4442 of the
California Public Resources Code). Other
states may have similar laws. Federal
laws apply on federal lands. A spark ar-
rester for the muffler is available through
your nearest service center (See REPAIR
PARTS manual).
Safety Rules .......................................... 2
Product Specifications ........................... 5
Assembly/Pre-Operation ........................ 6
Operation ................................................ 8
Maintenance Schedule .......................... 16
Maintenance ........................................ 16
Service and Adjustments ..................... 20
Storage ................................................ 27
Troubleshooting ..................................... 28
Warranty ............................................... 31
5