Husqvarna YTH2348 Owner's Manual page 19

SERVICE AND ADJUSTMENTS
f ......... -7
FIG. 20
ATTACH MOWER SIDE SUSPENSION ARMS (A) TO
CHASSIS - Position hole in arm over pin (B) on outside
of tractor chassis and secure with washer and retainer
spring.
Repeat on opposite side of tractor.
ATTACH REAR LIFT LINKS (C) - Lift rear corner of
mower and position slot in link assembly over pin on
rear mower bracket (D) and secure with washer and
retainer spring.
Repeat on opposite side of tractor.
NOTE: Be sure mower side suspension arms (A) are pointing
forward before sliding mower under tractor.
Slide mower under tractor until it is centered under
tractor.
FIRST INSTALL ANTI-SWAY BAR (S).
- From right side of mower, insert anti-sway bar into
hole in transmission bracket (T).
FIG. 18
- Pivot bar towards you and insert other end of bar
into hote in rear mower bracket (D). Move mower
as needed to insert ban
Secure with washer and retainer spring as shown
FIG. 19
FIG.21
Turn steering wheel to position wheels straight for-
ward.
ATTACH FRONT LINK (E) - Work from left side of trac-
tor. Insert rod end of link assembly through front hole
in tractor front suspension bracket (F) and secure with
retainer spring (G) through hole in link located behind
the bracket.
Insert other end of link (E) into hole in front mower bracket
(H) and secure with washer and retainer spring (J).
19
FIG. 22