Using The Remote Control - Haier ESA415J Use & Care Manual

NOTE: Dots are Braille text for sight impaired
Remote control may differ in appearance.
Temperature
(1)
Press the TEMP/TIME up arrow button to raise the
temperature. Each time you press or hold the TEMP/TIME up
arrow button, the temperature wilt go up I°F until it reaches
86°F (30°C).
TIMER
TEMPiTiME
TEMP/TIME
NOTE: One CR2025 battery (included) powers the remote
control. Replace battery after 6 months of use, or when the
remote control starts to lose power.
Power
r
Press ON/OFF to turn on the air conditioner.
ON/OFF
Mode
Press MODE to choose Fan, Coot, Energy Saver or Dehum.
MODE
Speed
Press SPEED to choose High, Med or Low.
SPEED
TEMP/TIME
(2) Press the TEMP/TIME down arrow button to lower the
temperature. Each time you press or hold the TEMP/TIME
down arrow button, the temperature wilt go down I°F until it
reaches 61°F (16°C).
TEMP/TIME
Timer
To set the Timer for a 1=hour to 24=hour delay before the
air conditioner is turned off (the air conditioner must be
On):
1. Press TIMER. Timer On indicator light on the air conditioner
control panel wilt flash.
TIMER
2. Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
3. After 5 seconds, Timer On indicator light on the air conditioner
control panel wilt remain on.
To set Timer to turn on the air conditioner, keeping
previous settings:
1. Turn on the air conditioner.
2. Press TIMER. Timer On indicator light on the air conditioner
control panel wilt flash.
3. Press the TEMP/TIME up or down arrow button to change the
delay time from 1 hour to 24 hours.
4. After 5 seconds, Timer On indicator light on the air
conditioner control panel wilt remain on.
To set Timer to turn on the a}r conditioner, changing the
previous settings:
1. Turn on the air conditioner.
2.
3.
Adjust the mode to Fan, Coot, Energy Saver or Dehum.
For Fan, Coot or Energy Saver mode, adjust the fan speed to
High, Med or Low.
NOTE: In Dehum mode, the Speed button wilt not operate.
11