Cycle Selection; Drying Options - Hotpoint HDA900 Use And Care Manual

HOn: llqr
0 Rla o
PLATE WARMER
(HE_*TED Oily O_
START
HOURS 2 O . •
DELAY
4e°
6"*i_
OFF@
RINSE& HOLD I_AtEeDrVO_
Dial Cycles
The RINSE & HOLD cycle is for rinsing
partial loads which will be washed later.
Do not use detetz_ent.
a. Make sure HEATED DRY is off.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.
The PLATE WARMER cycle is for warming
clean dishes and serving plates for the serving
of hot foods. The cycle will take approximately
39 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY on.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Selection Chart
Water Use
Gallons
(approx.)
Wash Cycles
POTS &
PANS 10.6 72
NORMAL WASH 9+ I 51 *
LIGHT WASH 7.9 51 *
WATER SAVER 6.4 51 *
RINSE & HOLD 3.0 12
WashCyele
Time
Minutes
(approx.)
Cycle Sequence
Man ' se
• Main
ml
B
8'*
!
*Unextended times. These cycle times will be increased approximately 2 1 minutes if HEATED WASH option is selecled
Drying Options:
HEATEDDRY, Available on all wash cycles except RINSE& HOLD. Add 3 1minutes to wash cycle time.
ENERGY SAVER. Duing heater is turned off. Dishes drv naturallv.