Advertisement
1
Dial Cycles
The RINSE & HOLD cycle is for rinsing
partial loads which will be washed later.
Do not
detergent.
use
a. Mtie sure HEATED DRY is off.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.
Cycle Selection Chart
Wash Cycles
POTS & PANS
NORMAL WASH
RINSE & HOLD
Drying Options:
HEATED DRY. Availahle on all wash cycles except RINSE & HOLD. Add 35 minutes to wash cycle time.
ENERGY SAVER. Drying heater is turned off. Dishes dry naturally.
Water Use
Time
Gallons
Minutes
72*
10.6
12
3.0
RINSE & HOLO (MUEOOWOFO
The PLATE WARMER cycle is for warming
clean dishes and serving plates for the serving
of hot foods. The cycle will t~e approximately
32 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY on.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Sequence
c
5
Advertisement
