Loading - Hotpoint HDA900 Use And Care Manual

HOW TO OPERATE YOUR DISHWASHER
NOTE: If dishwasher drains into a food
waste disposal, operate the disposal until
it is empty betbre starting dishwasher•
[
POTS& NORMAL UGHT WATER HEATED HEATED ENERGY
PANS WASH WASH SAVER WASH DRY SAVER
II I/ I} II I IJ
©¥GJe anarllY sa_mr
I
Features alTd appearance may vary slightly.
Step 1.
Load your dishwasher. (See
Loading section.)
Step 2.
Make sure the Cycle Indicator Dial is at the OFF
position and the door is unlatched. Add detergent
to the detergent dispenser. (See Detergent Guide.)
Use a rinse aid agent to help prevent spotting.
(See How to Use a Rinse Agent section.)
Step 5.
Select the desired Energy Saver Options.
• HEATED WASH--Use this option for
best performance with heavily-soiled dishes•
When selected, the wash cycle may be extended
while the dishwasher heats the water for the best
washing and duing. (See Cycle Selection Chart.)
•
HEATED DRY--Turns the dwing heater on for fast
drying. When selected, the cycle time will be
extended for 35 mimttes.
Step 3.
Latch the door.
Step 4.
• ENERGY SAVER_Shuts off the heating unit, thus
saving energy. Dishes air-dry naturally. It takes
longer but saves energy. You can open the door after
the motor stops to speed drying. Excellent for
overnight drying.
Select the desired wash
cycle.
,POTS & PANS--For items such as pots, pans and
casseroles with dried-on or baked-on soils• Everyday
dishes may be included• This cycle will get heavily
soiled dishes cleaner than the normal cycle• It will
not remove burned-on foods.
• NORMAL WASH--For most loads of everyday
dishes, glasses and cookware with medium soils•
Designed to yield high performance on normal soils•
• LIGHT WASH--For dishes that have been pre-
rinsed before loading. Also, for washing very
lightly
soiled dishes with soils that have not dried on.
.WATER SAVER--For dishes with light soils• This
cycle saves water by using 30% less water than the
NORMAL WASH cycle.
4
Step 6.
Turn the Cycle Indicator Dial to START or to the
desired DELAY START time.
• Turning the dial to START will begin the cycle
immediately. To obtain the benefits of a complete
cycle, be carefid that you do not turn the dial any
faxther than is necessa U to start the dishwasher•
There is a time delay between start-up and water
fill so you will not hear any wash action right away.
• The DELAY START will allow you to delay the
start time of your dishwasher automatically for tip
to 6 hours. Turn the Cycle Indicator Dial to the
desired time.