Hoover SteamVac F6213-900 Owner's Manual page 12

Cle the noZ
Unplug carpet cleaner from electrical outlet.
Remove solution and recovery tanks to prevent possible leaks.
;, i_,; iii "_ ',,
- _ '_, ", B
Lift up on top of nozzle (A) and slide off cleaner (Fig. 41).
Wipe debris off nozzle and front of cleaner with a damp cloth.
Tilt cleaner back, raising front of cleaner off floor. Slide nozzle
(B) up from bottom of dleaner (Fig. 42).
Press on upper portion of nozzle to snap in place.
Clean the brushes
Unplug carpet cleaner from electrical outlet.
Remove solution and recovery tanks to prevent possible leaks.
Tilt cleaner back so handle rests on the floor.
Pull brush assembly firmly to remove (Fig. 43).
D ->
Rinse brushes under running water.
Align posts (C) on brush assembly with slots (D) in cleaner
(Fi_. 4:1).
Turn brushes slightly, to align square post (E) with square hole
(F) in cleaner (Fig. 4_).
Press brush assembly firmly and snap in place.
Clean the brush filter
Unplug carpet cleaner from electrical outlet.
Remove solution and recovery tanks to prevent possible
leaks.
Tilt cleaner back so handle rests on the floor.
Squeeze filter frame (G) and pull it out until it stops (Fig. 45).
Wipe debris off filter.
12 _ Slide filter back into place.