Cleaning Tools - Hoover U5786-900 Owner's Manual

How to attach tool cover
The tool cover is
designed with a
"break- away"
feature which
allows it to snap
free if it is pushed
open too faT.
To reattach, align
hinges of cover
with slots on sides
of tool storage area.
Push cover down to
secure in place.
Cleaning tools
Tools allow for cleaning surfaces above the
floor and for reaching hard to clean areas.
Handle must be in the upright position for
tool use.
CAUTION: Agitator continues to rotate while
cleaner handle is in upright position, Avoid
tipping cleaner or setting it on furniture,
fringed area rugs or carpeted stairs during
tool use.
Attach wand and tools
Attach tool or wand to the hose [G).
Attach second wand or tool to'wand [H) by
pushing it firmly onto the wand.
Twist wand or tool slightly to tighten or
toosen the connection,
How to clean tools
To clean the hose and the powered hand
tool, wipe off dirt with a cloth dampened in
a mild detergent. Rinse with a damp cloth.
Do not submerge powered hand tool in
water.
Cleaning tools may be washed in warm
water with a detergent. Rinse and air dry
before using.
L , J
K
J!
N
Selectpropertool
1. Dusting brush may he used for carved
furniture, table tops, books, lamps, lighting
fixtures, venetian
blinds, baseboards,
shutters,
and registers.
J. Furniture nozzlemay be used for
upholstered furniture, draperies, mattresses,
clothing, automobile interiors, and carpeted
stairs.
K. Powered hand tool" may be usea for
upholstered furniture, carpeted stairs and
hard-to-reach places.
L. Crevice tool* may be used in tight spaces,
corners and along edges in such places as
dresser drawers, upholstered furniture, stairs
and baseboards.
M. Crevice wand* can be used in tight
spaces, corners and along edges in such
places as dresser drawers, upholstered fur-
n{ture, stairs, and baseboards. It can also he
used for extra reach with the dusting brush
and!or extension wand.
N. Wands are used to give extra length to
your hose, Use them with any of the above
tools,
*some models
8