How To Attach Tool; After Using Tool - Hoover SteamVac F7210-900 Owner's Manual

How to attach tool
The utility nozzle has a built-in brush to
help provide the scrubbing action some
spots may need for removal.
Unplug deep cleaner from electrical
outlet.
1. Place handle in upright position and
remove hose from rack.
2. Connect tool to hose by sliding it onto
connector until the tab (J) locks it
securely.
Using your thumb, push forward and
up on the latch (K) to remove tool.
After using tool
Drain suction hose by turning deep
cleaner ON and holding nozzle up for
several minutes. Do not press trigger.
Unplug deep cleaner from electrical
outlet,
Disconnect hose and solution tube
from deep cleaner.
The tool caddy can be removed and
hung on a coat hanger for storage.
Drain solution tube by placing round
end in sink and raising nozzle above
your head. Press the trigger.
12