Understanding The Control Panel - Haier HLF103Q User Manual

Understanding the Control Panel
@ @@ @ @©@@@ @¢>
Note: Features may vary per model.
Start/Pause Button: (1)
, Pressthe button to turn the dryer ON. Pressthis button once to start the dry
process. Press this button once again to pause the activity during the dry
cycle.
Off Button: (2)
• Press the button to turn on drayer off.
Signal Button: (3)
• Used to select buzzing volume or turn off the buzzer.
Temp Button: (4)
Used to set drying temperature. There are 4 available drying temperatures:
High, Medium, Low, and Air Dry (no heat).
Sensor Dry Level Button: (5)
" Used to set drying time of auto-programs, if no auto-program is selected,
pressing the button will cause the chime to sound.
Wrinkle Saver Button: (6)
• This convenient feature lets you delay the start of the dry cycle between 3 to
24 hours. Press the "Wrinkle Saver" to choose the number of hours you want to
delay the start of the cycle.
if no delay, the wrinkle saver indicator is off and remaining time indicator is
on.
The LED display indicates remaining time of non-reserved program, if setting
"Wrinkle Saver" in standby status, the LED display indicates 3 hr, which will
increase by 1 hr with each press (until 24 and return to 3). if held for 1.5
seconds, LED display indicated value will increase continuously.
13