System Clocks - EVGA nForce 780i SLI FTW User Manual

System Clocks

Select
display the System Clocks menu. From this menu, you are able to specify frequency settings,
HT multipliers, and Spread Spectrum settings. Note that in Figure 9, all of the options are
listed. On the actual BIOS screen, you will need to scroll down to see all the options.
Figure 13.
Note that all data in
50
EVGA
from the Advanced Chipset Features menu and press
System Clocks
Parameters
**Frequency Settings**
CPU Freq, MHz
FSB Reference Clock, MHz
CPU Multiplier
CPU N/2 Ratio
PCIe 16_1, MHz
x
PCIe 16_3, MHz
x
PCIe 16_2, MHz
x
SPP<->MCP Ref Clock, MHz
**HT Multiplier**
nForce SPP --> nForce MCP
nForce SPP <-- nForce MCP
**Spread Spectrum**
CPU Spread Spectrum
HT Spread Spectrum
PCIe Spread Spectrum(MCP)
SATA Spread Spectrum
Enter:Select
:Move
System Clocks Menu
white is for information only, data in
changeable, and data in a
Phoenix – AwardBIOS CMOS Setup Utility
System Clocks
Settings Current Vale
2933.3 2933.3
1066.7 1066.7
[11 X] 11X
Disabled
[Auto] 100
[Auto] 100
[Auto] 100
[Auto] 100
[5 ]
x
[5 ]
x
[UP Spread]
Disabled
Disabled
Disabled
+/-/PU/PD:Value
F5: Previous Values
red box is highlighted for selection.
Item Help
Main Level
CPU frequency multiplier.
CPU core clock
= FSB Ref Clock/4 *
CPU Multiplier

F10:Save ESC:Exit F1:General Help
F7:Defaults
yellow is changeable, data in
to
Enter

blue is non-