Temperature Controls - GE GSC22KGRCBB Owner's Manual And Installation

About the temperaturecontrols, www.GEAppliances.c
I
f
The temperature controls are preset in the factory at 5 for both
the refrigerator and freezer compartments. Allow 24 hours for the
temperature to stabilize to the preset recommended settings.
Several adjustments may be required. Each time you adjust
controls, allow 24 hours for the refrigerator to reach the setting
you have selected.
Setting either or both controls to 0 stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Air FlowSystem
Tile Perfbnnance ;Mr How System is designed to Ina_mfize temperature conlrol in lhe refl-igeralor and
freezer coInpartmenls. This unique special featore consists of lhe ;Mr Tower Mong the [rack wall of tile
refrigerator and Ihe Air Tunnel on tile bollx_In porlion of the freezer rear wall. Placing food in f_ont of the
louvers oil these coInponenls will not affect perfbnnance. ;Mlhoogh tile Air Tower and the Air Tunnel can
be removed, doing so will affect temperature perfk_rmance. (For removal instructions, on-line, 94 hours a
day, contact us at GEAppliances.com or call 800.GE.CARES. In Canada, contact us a/www.geappliances.ca
or call 1.800.361.3400.)
5