Advertisement
Available languages
Available languages
Installation
Instructions
REMOVING THE FREEZER DRAWER (on
some
models)
The freezer drawer
can be removed,
if needed,
to fit through
tight areas.
Read these instructions
completelg
and carefullg.
[]
REMOVE THE BASKET
[]
Open the freezer drawer
until it stops.
[]
The freezer basket rests on a frame inside the
freezer drawer. Lift the basket up at the back.
[]
Lift the front up and lift the entire basket up
and out of the drawee
\
[]
REMOVE THE DRAWER FRONT
[]
Remove the screw on each side of the railing.
\
Screw
[]
[]
[]
[]
REMOVE THE DRAWER FRONT (cont.)
Lift up on both sides of the freezer drawer
handle to separate the drawer railings from
the rail assemblies.
Set the drawer front on a non-scratching
surface,
Push the rail assemblies back into locking
position.
Rail Assemblg
Drawer
Assemblg
[]
REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawer and
refrigerator
door, the refrigerator
will still not
fit through
a doorwag, the base grille can be
removed.
[]
Remove the base grille bg removing the
screws.
2O
Advertisement
