GE WSLP1100 Owner's Manual & Installation Instructions page 16

Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
WSLP1100--TWO-FAUCET CONNECTIONS
If vo/l have two sel);H'ate vdlter connections_
yo/li" washei"
can be connected to both the hot and cold water fimcets.
This kit can be i)urchased fi'om your dealer or fi'(>m Parts
and Accessories. In the United States, call 800.626.2002.
In Canada, consult the yellow pages fi)r yore" local Camco
n/in/bei:
TO CONNECT THE WASHER:
I_CONNECT TO WATER LINE
Connect HOT and COLD water inlet hoses to the
HOT and COLD fimcets.
I_CONNECT DRAIN HOSE
Secure the drain hose to the sink or stand pipe.
Cable
Tie
CableTie
Sink
Stand Pipe
[] PLUG THE POWER CORD INTO A
3-PRONG GROUNDED OUTLET
/
Insure proper ground
exists before use
[] INSTALLATION CHECKLIST
Before starting the washer, check to make sure:
Main power is turned on.
[2_1 T he washer is plugged in.
F_IThe water timcets are turned on.
UJ The unit is level.
The drain hose is properly tied up.
U_lThere are no leaks at the timcet, drain line
or w;isheE
TO DISCONNECT THE WASHER:
I I_ TURN WATER FAUCETS OFF
I
I_UNPLUG POWER CORD AND
RETURN IT TO THE STORAGE
AREA
[] DISCONNECT THE DRAIN AND
WATER SUPPLY HOSES
Hang them on the stora(,e rack.
16