Reversible Door Instructions - GE DOE7200S Use And Care Manual

REVERSIBLE DOOR INSTRUCTIONS
(on models so equipped)
Tools Needed
A phil lips screwdriver is needed to reverse the dryer door.
Dryer Door
1. Open the door and remove the filler plugs
from the side of the opening without hinges.
2. With the door
completely open,
remove the bottom
screw from each hinge
on the dryer face.
3. Insert these screws
about half way into
the top holes, for
each hinge, on the
opposite side. (Where
you removed the filler plugs.)
4. Loosen the top screw fiom
each hinge on the &Ter face
half way.
5. With one hand holding the top
of the door and the other hand
holding the bottom, remove the
i
door fiom the dryer by lifting it up and out.
.
.
Rotate the door 180 °. Insert it
on the opposite side of the
opening by moving the door /
in and down until the top
/
hinge and the bottom hinge \
are resting on the top screws
x
inserted in step 3.
Remove the remaining ti
screws from the side of { ['_-r_l
the opening from whichl-_tall
the door was removed. [ _.-.ll
With these screws, '_1
secure each hinge at II I
the bottom. I _
8. Tighten the two top
screws of each hinge.
9. Reinsert the plastic plugs on
the side from which the door was removed.
I\\