Maintenance Table; General Recommendations - Craftsman 536.270270 Operator's Manual

MAINTENANCE
MAINTENANCE TABLE
FIRST EVERY EVERY EVERY
EACH 2 25 50 100 BEFORE
PROCEDURE USE HOURS HOURS HOURS HOURS STORAGE
M
Blade, Inspect and Sharpen V'
O
W
E
Battery, Check and Charge V' V'
Lubrication V_ V_
E
Oil, Change V'
N
G
Muffler, Check V' V'
N
E
Spark Plug, Check V' V'
GENERAL RECOMMENDATIONS
1. The owner's responsibility is to maintain this product. This will
extend the life of the product and is also necessary to maintain
warranty coverage.
2. Check the spark plug, drive brake, lubricate the unit, and clean
the air filter once a year.
3. Check the fasteners. Make sure all fasteners are tight.
4. Follow the Maintenance and the Service And Adjustment sec-
tion to keep the unit in good operating condition.
WARNING: Before you make an inspection, adjust-
_ ment, or repair to the unit, disconnect the wire to the
spark plug. Remove the wire from the spark plug to
prevent the engine from starting by accident.
CHECK THE TIRES
Check the air pressure in the tires. Tires with too much air pressure
will cause the unit to ride rough. Also, the wrong air pressure will
keep the mower housing from cutting level. The correct air pressure
(PSI) is as follows. Semi-pneumatic front tires do not require air.
Front Tires 22 PSI (1.5 BAR)
Rear Tires 14 PSI (1 BAR)
F-020611L 19