System Parts Replacement; Opening The Cover - TYAN Transport GS12 (B5103G12S2 Manual

8

System Parts Replacement

In case the need arises, you can replace various system components. When removing
and installing a device, be sure to read the instructions accompanying the device
together with the relevant section in this chapter.

8.1 Opening the Cover

CAUTION:
Static electricity can destroy electronic devices. Whenever you handle an option
l
outside of its protective packaging, first discharge any static electricity from your body
by touching a protective grounding device or unpainted metal on the rear panel of the
system before unplugging the power cord.
Before you remove or install any component, turn all power switches off. Unplug all
l
power cords from the system and all peripherals. Leaving the power on can cause
serious damage to your system.
If the system is mounted on an equipment rack, remove the system from the rack and
l
take it to a service area. Do not attempt to disassemble the system while it is still in the
equipment rack.
1. Turn off the power of the system.
2. Disconnect all power cords and cables from the system.
3. Remove two screws from the back of the system. Pull the cover backward to detach
it.
77
http://www.TYAN.com