GE JBS03 Owner's Manual And Installation Instructions page 7

Usingthe surface units, eEA ,iancoscom
Throughout this manual, features and appearance may vary from your model
How to Set
Push the knob in and turn in either
direction to tile setting you want.
At tx_th OFFand HI the control clicks into
position. You may hear slight clicking
sounds during cooking, indicating tile
control is keeping tile power level you set.
Be sure you turn the control knob
to OFFwhen you finish cooking,
Indicator Lights(on
radiant glass models only)
A HOTSURFACE indicator light will glow when any
radiant element is turned on, and will remain on until
the surface is cool enough to touch.
A SURFACE UNIT on indicator light will glow when any
surface unit is on.
NOTE:TheSURFACE UNIT onindicator lightmayglowbetween
thesurface controlsettings of LOand OFF, b ut thereis nopower
to thesurface units.