SERVICE A
ADJ
_
WARNING: TO AVOID SERIOUS iNJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
* Depress brake pedal fully and set parking brake.
* Place attachment clutch in "DISENGAGED"
position.
* Turn ignition key to "STOP" and remove key.
* Ensure the blades and all moving parts have completely stopped.
* Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TO REMOVE
MOWER
(See Fig. 20)
•
Place attachment clutch in "DISENGAGED"
position.
•
Lower attachment lift lever to its lowest position.
•
Remove mower belt from electric clutch pulley (M).
•
Disconnect front link (E) from mower - remove retainer
spring and washer.
•
Go to either side of mower and disconnect mower
suspension arm (A) from chassis and rear lift link (0)
from rear mower bracket (D) - remove retainer springs
and washers.
•
Go to other side of mower and disconnect the suspen-
sion arm and rear lift link.
CAUTION: After rear lift links are dis=
connected,
the attachment
lift lever
will be spring loaded. Have a tight grip
on lift lever when changing position of
the lever.
TO iNSTALL
MOWER
(See Figs. 21=25)
Ensure tractor is on level surface and engage parking
brake.
•
Lower attachment lift lever to its lowest position.
j
_#_
CAUTION: Lift lever is spring loaded.
Have a tight grip on lift lever, lower it
slowly and engage in lowest position.
NOTE: Ensure mower side suspension arms (A) are point-
ing forward before sliding mower under tractor.
•
Slide mower under tractor until it is centered under
tractor.
•
Slide mower out from under right side of tractor.
Fig. 20
03000tex
18