Zoom 708II Bass Operation Manual page 9

WE R
A 0
Storing an effect
Press the [STORE/EXECUTE]
1
key.
The 708II goes into store standby mode.
If a patch from the PRESET group was
selected, "A0" in the USER group is
automatically selected as store target.
Use
2
switches to select the store
target
number.
Changing the sound of a patch
1
A 0
the [W]/[Q]
bank and patch
While playing your instrument, operate the
knobs on the panel.
Each knob controls a certain parameter,
as indicated below.
[DRIVE VARIATION] key
Parameter knob 1
Adjusts the gain or compressor
sensitivity of the DRIVE module.
Parameter knob 2
Adjusts the modulation rate of
chorus, flanger, and similar
effects. For some patches, the
knob adjusts the echo level.
◆
For a list of parameters adjusted with the
knobs, see p. 33 – 38.
◆
To edit a patch more in detail, see p. 18.
To carry out the store operation,
3
press the [STORE/EXECUTE] key
once more.
foot
To cancel the process, press the [CANCEL/
EXIT] key.
◆
For a detailed explanation of patch storing, see p. 20.
◆
For information on how to return the USER group
patches to the factory default condition, see p. 32.
[DRIVE] knob
Selects the amp
modeling
settings or bass
effects of the
DRIVE module.
Parameter knob 3
Adjusts the reverb or delay level.
ZOOM 708II BASS
9