Zoom 708II Bass Operation Manual page 15

E
MODULE [ ] Key
Rewind
Press both keys to return to
the start of the sample
[W] foot switch
Play/Stop
9.
If necessary, you can adjust the
sample playback level with parameter
knob 3.
When you operate parameter knob 3, the
indication "SP LVL" appears on the display.
The [BANK/PATCH] indicator shows the
sample playback level, using a range from 0 -
30. Adjust the level to obtain a suitable
playback volume.
S P L V L
H
INT
You can also adjust the playback level with the
expression pedal.
To carry out loop playback of a
10.
specific interval, play the sample and
press the [A → B] key at the desired
start point.
→
The [A B] LED flashes and loop playback is
enabled. The point at which you pressed the
→
[A B] key is taken as the loop start point. If no
end point has been set, the end of the sample is
taken as the end point.
Start point
Playback
R
MODULE [ ] Key
Fast-forward
[Q] foot switch
Start sampling
3 0
If you wish to set the loop end point,
11.
press the [A → B] key once more
during loop playback of the sample.
→
The [A B] LED now stays constantly lit, and
the point at which you pressed the [A
is taken as the loop end point.
When the end point has been set, loop playback
is carried out between the start and end points.
Start point
Playback
To cancel loop playback, press the
12.
[A → B] key once more (or change the
sample number).
→
The [A B] LED goes out, and the unit returns
to normal one-shot playback.
To terminate the sampler function,
13.
press the [SAMPLER] key while the
sampler is stopped, or push the
expression pedal all the way down.
The unit returns to normal play mode.
N
OTE
• The start point and end point settings are reset
when you change the sample nunber or switch
the sampler function off or on.
• The sampler function cannot be used together
with the rhythm pattern function.
• While the sampler function is on, the MOD
module and REV module cannot be used. (They
are automatically set to OFF.)
• When sampling to a SmartMedia card, the
sampled data are stored on the SmartMedia card
automatically. There is no need for the user to
perform any steps for storing.
• If you have sampled to the internal memory, you
cannot save the sample.
→
B] key
End point
15
ZOOM 708II BASS