2.1.6 Installing a Floppy Drive
This section describes how to install a floppy disk drive in the
TA26 B5383 if required.
Follow these instructions to install a floppy disk drive in the
TA26 B5383.
1. Remove the top, left hand drive tray from the TA26
B5383 as shown.
Note:
accommodate a floppy disk drive.
2. Attach the supplied FDD rails to the floppy disk drive with
six (6) M3L5, BIN (+) screws. The wide end of the rails
should be pointing towards the front.
24
The top, left hand drive bay is the only bay that can
Chapter 2: Setting Up