Sylvania ZV450SL8 Owner's Manual page 53

4
Use [K / L] to select "VCR DVD",
then press [ENTER].
General Setting
Playback
Display
Video
Recording
Dubbing Mode
Clock
VCR
Channel
DVD
Reset All
5
Press [SETUP] to exit.
Press [VCR
6
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
• Since it takes about a few seconds before the
actual dubbing begins, please allow extra 5
seconds when selecting the starting point.
7
Press [DVD ].
Make sure to select a recording speed using
[REC SPEED].
8
Press [DUBBING].
VCR to DVD duplication will start.
9
Press [STOP C] to stop the recording.
Title list will automatically appear.
• If you want to watch the duplicated material
after the VCR to DVD duplication, press [TOP
MENU] first then press [ENTER] twice.
Note
• When you turn off the unit after setting the dubbing mode to DVD
automatically.
• You cannot change the output mode during VCR to DVD or DVD to VCR duplication.
For Audio CD to VCR duplication:
• This function is available on Audio CD, not MP3 files.
For VCR to DVD duplication:
• After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function.
This is not a malfunction. Be advised to playback the cassette tape until the picture is stabilized, then set the
starting point which you wish to start recording, and start VCR to DVD duplication.
• The playback sound mode is followed by the setting of VCR playback sound mode on page 95. Set the playback
sound mode to which you wish to record to the DVD.
• This unit will automatically stop the duplication if playback with no image is for more than 3 minutes during VCR
to DVD duplication.
• Dubbing indicator will appear on the front panel display during dubbing.
E9H10UD.indd 53 E9H10UD.indd 53
DUBBING MODE
VCR to DVD
Auto Chapter
Auto Finalize
Aspect Ratio (Video mode)
Dubbing Mode
DVD
Make Recording Compatible
VCR
].
DVD to VCR
4
Use [K / L] to select "DVD VCR",
then press [ENTER].
General Setting
Playback
Display Auto Chapter
Video Auto Finalize
Recording Aspect Ratio (Video mode)
Dubbing Mode
Clock Dubbing Mode
VCR DVD
Channel Make Recording Compatible
DVD VCR
Reset All
5
Press [SETUP] to exit.
Press [DVD ].
6
Press [PLAY B]. Then press
[PAUSE F] at the point you wish to
start recording.
7
Press [VCR ].
Make sure to select a recording speed using
[REC SPEED].
8
Press [DUBBING].
DVD to VCR duplication will start.
9
Press [STOP C] to stop the recording.
VCR, the setting will be set to VCR DVD
EN 53
2007/02/19 14:55:41 2007/02/19 14:55:41