Appendix; Removing The Stand - Sharp AQUOS LC-40LE820UN Operation Manual

Appendix

Removing the Stand

• Before detaching (or attaching) the stand, unplug the AC cord.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
■
LC-40LE820UN/LC-46LE820UN/LC-52LE820UN
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
Loosen the screw used to secure the stand cover
and remove the cover.
• To attach the stand, perform the above steps in reverse order.
■
LC-60LE820UN
Before attaching/detaching the stand
• Before performing work, make sure to turn off the TV.
1
2
1
1 Loosen the screw used to
secure the stand cover.
2 Remove the cover.
• To attach the stand, perform the above steps in reverse order.
60
2
1 Unfasten the four screws used to secure the
stand in place.
2 Detach the stand from the TV. (Hold the stand so
it will not drop from the edge of the base area.)
2
Unfasten the four screws used to
secure the stand in place.
2
3
Detach the stand from the TV.
1