Table of Contents
Advertisement
10 | Configuring eCopy ShareScan OP
Generating a license report
The license report will help you recover your product keys and license codes, if necessary. You
should generate a license report whenever you activate your licenses. Keep the report in a safe
place in case you need to restore the license information. A printed report is also useful if you need
to manually activate product keys from another computer.
To generate a license report:
In the console tree, select
1
2
On the
License Information
In the
3
Save As
Managing connectors and services
An eCopy ShareScan OP system can use any of the base connectors provided by eCopy, Inc. as well
as add-on connectors or services that you have purchased.
Managing connectors and services involves the following tasks:
Installing connectors and services (see "Installing connectors and services" on page 10).
■
Removing connectors and services (see "Removing add-on connectors" on page 11).
■
Configuring connectors (see "Configuring connectors" on page 11).
■
Activating connectors (see "Activating connectors" on page 13).
■
Installing connectors and services
To install a base connector that you did not install during initial installation of the ShareScan OP
software, run the setup program again and then select the Modify option.
To install an add-on connector or service, you must run the setup program included with it. The
setup program installs the software and registers it on the ShareScan OP Services Manager. Once
registered, the connector appears in the console tree and the service appears in the appropriate
location in the console.
Note: To refresh the list of connectors, right-click Connectors and then click Refresh Connectors or
click the Refresh connectors button that appears on the toolbar when the Connectors node is
selected.
System Information > Licensing
tab, click
dialog box, specify where you want to save the file and then click
Report
.
.
.
Save
Advertisement
Table of Contents
