Appendix; Troubleshooting - Sharp LC-32LE440U Operation Manual

Hide thumbs Also See for LC-32LE440U:
Table of Contents

Advertisement

Appendix

Troubleshooting

P
o r
b
e l
m
No power
Unit cannot be
operated.
Remote control unit
does not operate.
Picture is cut off/with
sidebar screen.
Strange color,
light color, or color
misalignment
Power is suddenly
turned off.
No picture
No sound
The TV sometimes
makes a cracking
sound.
CLEARING THE MASTER PASSWORD
If you forgot the password number, reset the secret number by following the procedures
below:
1.
Press
MENU
2.
Select
"Initial Setup",press "ENTER"
3.
Select
"Individual Setup",press "ENTER"
4. Press number 7071
5. Select "Secret No."
6. Enter new password
As a precautionary measure, make a note of your secret number above, cut it from this
manual, and keep it in a safe place.
40
Check if you pressed POWER on the remote control unit.
(See page 20.) If the indicator on the TV is still red,
press POWER on the TV.
Is the AC cord disconnected? (See page 8.)
Has the power been turned on? (See page 20.)
External influences such as lightning, static electricity, may
cause improper operation. In this case, operate the unit after
first turning off the power of the TV or unplugging the AC cord
and re-plugging it after 1 or 2 minutes.
Are batteries inserted with polarity ( ,
(See page 11.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light illuminated near the remote control
sensor?
Are screen mode adjustments such as picture size made
correctly? (See page 25.)
Adjust the picture tone. (See page 28.)
Is the room too bright? The picture may look dark in a room
that is too bright.
Is the sleep timer set? (See page 22.)
The unit's internal temperature has increased. Remove any
objects blocking vent.
Is connection to other components correct? (See page 15.)
Is the correct input selected? (See page 22.)
Is the volume too low? (See page 22.)
Have you pressed MUTE on the remote control unit?
(See page 22.)
This is not a malfunction. This happens when the cabinet
slightly expands and contracts according to change in
temperature. This does not affect the TV's performance.
P
o
s
s
b i
e l
S
l o
t u
o i
n
) aligned?

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents