Advertisement
Installation
Rear Connector Layout (con't)
10. Power Connection (refer to the figure in the previous page)
Use only the AC power adapter supplied with the system.
Input: 100~240V AC 1.5A
Output: 19V DC 4.74A
Plug the 19V AC/DC adapter (as in the figure 1 above) to the PN-
TPC1W's power input jack (as in the figure 2).
11. Power Button
This button will stay lit if the PN-TPC1W is powered on. If the
PN-TPC1W doesn't power up after the AC is connected, then
press this button to power up. If normal Windows shutdown is
not shutting down the PN-TPC1W, then press this button for
more than 4 seconds will turn off the PN-TPC1W. In this case,
run Disk Cleanup in the Windows next time the PN-TPC1W is
powered up.
12. WiFi antenna connector (optional; refer to the figure in the
previous page)
Install the enclosed antenna to the WiFi connector and turn
clockwise.
Orient the antenna mast to achieve optimum reception and
tighten the antenna base to the WiFi Connector.
6
Advertisement
