Rear View - Philips BDL6551V User Manual

User Manual BDL6551V
2.2.

REAR VIEW

Dent depth: 6mm
1. VIDEO SOURCE button
• Use this button to select the input source.
• When the On Screen Display menu is active, this is also used as the SET button.
2. MENU button
• Use this button to engage the On Screen Display menu.
• When the On Screen Display menu is active, use this button to return to the previous menu.
3. /
• When the On Screen Display menu is active, use these as the UP/DOWN menu buttons.
• Press and hold the
4. /
• When the On Screen Display menu is active, use these as the PLUS/MINUS menu buttons.
5. POWER button
Use this button to turn the display on or put the display to standby.
6. Power indicator
Indicates the operating status of the display:
- lights green when the display is turned on
- lights red when the display is in standby mode
- blinks red when the display enters DPMS mode
- off when the main power of the display is turned off
7. Smart Insert installation holes
Location for the Smart Insert (for integration of a small form factor PC) and M4 screws. (Maximum
load: 2kg)
8. Carrying handle
Use these handles when carrying the display by hand.
9. Cable retainer installation holes
Install the cable retainer using these holes.
8
button
and
button
RETURN TO THE CONTENTS
1 2 3
7
buttons simultaneously for 3 seconds to lock or unlock all buttons.
4 5 6
9
8