User Manual BDL6551V
1.4.
PORTRAIT MOUNTING
Wall mounting holes
Notes:
• Metric 6 (10mm) screws (with a length 10-15mm longer
than the thickness of the mounting bracket) are needed for
wall mounting (not included). Tighten the screws securely
(recommended torque: 470 - 635N•cm)
• The mounting interface should comply with the UL1678
standard in North America. The wall mount system should
be strong enough to bear the weight of the monitor
(approx. 50 kg (110 lb) without stand).
How to use the logo guider?
How to remove the logo
Note: When installing the display on the wall, please consult a professional technician for proper installation. The manufacturer
accepts no liability for installations not performed by a professional technician.
Note: The remote control sensor should be on the right side
when rotating your display.
RETURN TO THE CONTENTS
Allowable tilting angle in Portrait Mode