Operating Environment Conditions - Hitachi DZHV595E Instruction Manual

Table of Contents

Advertisement

Safety Instruction
Do not store the camera in intense heat or cold for long periods of time, as this may result in permanent
damage to the camera.
Do not use or store the product in dusty, dirty, or sandy areas, as its components may be damaged.
Do not drop, puncture or disassemble the camera. High-voltage internal components create the risk
of electric shock when exposed.
Use the camera with care. Rough handling may damage the internal components.
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the product. Clean only
with a slightly damp soft cloth.
Do not ignite the flash close to eyes, or closer than prescribed minimum distances as this may result
in damage to vision. When using the flash, the camera should be at least one meter from the eyes of
the subject.
Do not open the battery cover while an image is being recorded. Doing so will not only make storage
of the current image impossible, it can also corrupt other image data already stored in file.
Test for proper operation before using the camera

Operating Environment Conditions

This camera is designed for use in temperatures ranging from 5°C to 35°C (41°F to 95°F).
Do not use or keep the camera in the following areas:
- In areas subject to direct sunlight
- In areas subject to high humidity or dust
- Near air conditioners, heaters, or other areas subject to temperature extremes
- Inside of a closed vehicle, especially one parked in the sun.
- In areas subject to strong vibration
Battery Usage and Power Supply
Use only the type of battery that came with your camera. Do not use batteries of different specifications.
Doing so may lead to the potential for serious damage.
Insert the battery according to the instructions. Inserting the battery incorrectly can cause damage to
the product and possibly start a fire.
Remove the battery to avoid the fluid leakage if the camera is not going to be used for an extended
time.
If the battery is crushed or damaged, remove it immediately to avoid battery fluid leakage and
abnormal expansion.
The camera may feel warm after long periods of continuous use which is normal and not a malfunction.
Battery will be in high temperature after long time using (about 1hr), Please be careful while taking
out the battery.
Please be careful if you may need to take out the battery by finger nail.
Precautions
2
EN

Advertisement

Table of Contents
loading

Table of Contents