Table of Contents
Advertisement
Symptom
Power turns off
immediately after being
turned on.
When power is turned
on, the LCD screen will
turn on and off.
The ACCESS/PC
indicator is blinking,
even though nothing is
displayed on LCD
monitor screen.
Power goes off
unexpectedly.
Power cannot be turned
off.
Even if the DVD video
camera/recorder is off,
opening the cover will
cause the ACCESS
indicator to blink.
138
Cause and Correction
Is battery charged?
Charge it.
Is Power Save set to "On"?
If the powered DVD video camera/recorder is left for as long as 5
minutes without recording or playback with "Power Save: On"
specified, it will automatically turn off to save battery power. To
restart recording in this case, set the power switch to "OFF" and
then set it to "
". You can also specify "Power Save: Off" to stop
automatic power off.
Detach the battery or AC adapter/charger once, and then press
the RESET button of DVD video camera/recorder: Reattach a
power supply to DVD video camera/recorder before turning it on
again.
The DVD video camera/recorder will automatically turn on to
recognise a disc: Closing the cover will automatically turn the
DVD video camera/recorder off.
Reference
page
28
35
27, 29, 145
40
Advertisement
Table of Contents
