Sorting Tv Channels Automatically (Follow Tv) - Philips VR330/07 Operating Instructions Manual

I don't know the channels for my TV stations
In this case, press
K B
start the automatic channel search. A changing
channel number will appear on the TV screen.
Continue the automatic search until you have
found the desired TV channel.
8.
8.
Save the TV channel with
9.
9.
To search for other TV channels, begin again
at step 5.
10.
10.
To end, press
STATUS/EXIT
Sorting TV channels automatically
(Follow TV)
When the automatic channel search function is
activated, the TV channels are saved in a specific
order. This may vary from the order of TV chan-
nels on the TV.
This function changes the order of TV channels
saved in the video recorder to match that of the
TV.
Make sure that the video recorder and the TV
are connected by a scart cable.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2. Press . The main menu will appear.
MENU
3.
3. Select 'TUNER SET UP' with
confirm with
B 1
4.
4.
Select 'FOLLOW TV' with
confirm with
B 1
SELECT K L CHOOSE B
AUTO TUNING
MANUAL TUNING
FOLLOW TV
MOVE
END=EXIT
5.
5.
'P:01' will appear in the video recorder dis-
play.
6.
6.
Select programme number '1' on the TV.
7.
7. Confirm with
B 1
remote control. The video recorder compares
the TV channels on the TV and the video
recorder.
If the video recorder finds the same TV chan-
nel as on the TV, then it stores it at 'P01'.
in 'CHANNEL' to
L C
.
B 1
.
K B L C
.
and
K B L C
.
on the video recorder
'NO TV SIGNAL' will appear in the TV screen.
The video recorder is not receiving a video
signal from the TV.
Check the plug on the scart cable.
Check your TV's operating instructions to see
which scart socket is used for video signals.
If this does not help, it's not possible to use this
function. Please read the section 'Sorting TV
channels manually'.
8.
8.
Wait until the next number, e.g. 'P:02' appears
in the display.
9.
9. Select the next programme number on the
TV, e.g. '2'.
10.
10.
Confirm with
11.
11.
Repeat steps 8 to 10 until you have assigned
a programme number to all TV channels.
12.
12. To end, press
and
8
.
B 1
.
STATUS/EXIT
EN