EverFocus EZ550 Operation Instruction Manual page 38

C H A P T E R 3 O S D
Please turn the mini-joystick LEFT ( ) or RIGHT ( ) to adjust the value for size
of the area to be covered.
AREA1
AREA3
Additionally, it is possible to change the position of the area to be covered.
Please refer to the following example for detailed steps on moving AREA1 to
center.
1. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT:
40.
AREA1
2. Increase DOWN scale value by 20. AREA1 position after change is: TOP: 10,
DOWN: 45, LEFT: 20 and RIGHT: 40.
AREA1
3. Increase TOP scale value by 20. AREA1 position after change is: TOP: 30, DOWN:
45, LEFT: 20 and RIGHT: 40.
AREA1
M E N U A N D C O N F I G U R A T I O N
AREA2
AREA4
36