Setting Up And Connecting The Stereo System - Hitachi AXM75DAB Instruction Manual

48 POWER
switch the system from standby to
operating state and off.
49 /
reverse/forward track selector.
reverse/forward search.
50 MUTE
sound pause to switch off the
sound reproduction. By pressing
the button again, the sound is
switched on again.
51 MANUAL TUNE
to start manual tuning at DAB.
52 VOL. +/-
to adjust volume.
53 OPEN CLOSE
to open and close the CD/MP3
CD-ROM transport drawer.
54 PAUSE
to stop and restart CD/MP3 CD-ROM
playback.

SETTING UP AND CONNECTING THE STEREO SYSTEM

Before switching on the stereo system...
... please read carefully the instructions
on the following pages.
The functional arrangement of the
controls makes the stereo system
easier to operate.
To make use of all the options available,
you should nevertheless study these
instructions carefully.
Important!
Unauthorized opening of the equipment
will invalidate any warranty claims.
BRIEF INSTRUCTION
55 STOP
56 REPEAT
57 0-9/+10
58 RDS INFO/MP3 INFO
59 MEMORY
60 BALANCE
Installation
You must take the room layout into
consideration (arrangement of power
and antenna sockets).
Switch off the unit before connecting.
Make sure all the connecting are
correct. Plug-in connections which are
too loose can cause operational
malfunctions.
10
to stop CD playback.
repeat function/repeat of selected
passage.
preset station memory pushbutton to
save station/track selection.
in TUNER operation mode, to select
displaying various R.D.S. information.
when playing MP3 CD-ROM to display
ID Tag of MP3 (Title,Artist & Album name)
if available.
CD/TUNER memory
pushbutton.
/
Centric adjustment of the channels
on the right and on the left.
Note:
To help your dealer identify your
stereo system if after sales service
is required, please quote the serial
number inscribed on the name
plate on the rear of the stereo
system.