Front Turn Signal/Parking Light; Front Fog Light - Chrysler Sebring Owner's Manual

Front Turn Signal/Parking Light

1. Raise and prop open the hood.
2. Rotate the bulb's electrical connector one-quarter turn
counterclockwise and remove it from the headlight hous-
ing.
MAINTAINING YOUR VEHICLE 413
3. Remove the bulb from the connector socket and install
the replacement bulb.
4. Install the bulb and connector assembly into the
headlight housing and rotate the connector one-quarter
turn clockwise to lock it in place.

Front Fog Light

NOTE: Access to the lights through the lower fascia
cutout is limited. We recommend you access the lights by
turning the steering wheel to allow access and remove
the inner fender shield.
7