Palm Handhelds m100 Handbook page 91

To select a business card:
1. Create an Address Book record that contains the information you
want on your business card.
2. Tap the Menu icon
3. Tap Record, and then tap Select Business Card.
4. Tap Yes.
To beam a record, business card, or category of records:
1. Locate the record, business card, or category you want to beam.
2. Tap the Menu icon
3. Tap Record, and then tap one of the following:
The Beam command for an individual record
In Address Book only: Beam Business Card
Beam Category
Tip: You can also beam a business card by holding down the
Address Book application button
dialog box appears.
4. When the Beam Status dialog box appears, point the IR port
directly at the IR port of the receiving handheld.
Tip: For best results, handhelds should be between 10
centimeters (approximately 4 inches) and 1 meter
(approximately 39 inches) apart, and the path between the
two handhelds must be clear of obstacles. Beaming distance
to other Palm OS handhelds may be different.
5. Wait for the Beam Status dialog box to indicate that the transfer is
complete before you continue working on your handheld.
To beam an application:
1. Open the Applications Launcher.
2. Tap the Menu icon
3. Tap App, and then tap Beam.
4. Select either Handheld or Card from the Beam From pick list.
Chapter 5
.
.
.
until the Beam Status
Page 83