Front Panel Controls - Cerwin-Vega CV-5000 User Manual

FRONT PANEL CONTROLS

1. Rack Mounting Ears
Two front panel mounting holes are provided on each mounting ear.
2. Fan Vent
CV-5000 amplifier is cooled by two rear-mounted fans. Cool air flows through the front fan
filters, reducing the temperature of the inside components while forcing the heat out the rear
vents. Never block these vents and keep them clean at all time.
3. AC Power Switch
This switch controls the unit's main power.
4. Signal Indicators
These green and yellow LED will illuminate to indicate that a signal is present at the amplifier
input, and that the signal is being amplified.
5. Clip Indicators
These red LED will illuminate at the clipping threshold. If it lights frequently, you could be
overloading the amplifier and a distorted signal is possibly being output. Under heavy clipping
activity, lower the channel gain controls to reduce the risk of damage to your speakers and
amplifier.
6. Active Indicators
These blue LEDs indicate that AC power is connected and the amplifier is turned on.
6