3:2 Pulldown; Xga Mode - Panasonic TH-42PD12U Operating Instructions Manual

3:2 PULLDOWN

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie
pictures, which are recorded at 24 frames per second.
If the picture is not stable, turn the setting to OFF.
Note:
When ON, this setting only affects the following signal input:
• NTSC / PAL signal input during "VIDEO (S VIDEO)" input signal.
• 525i(480i), 625i(575i), 1125(1080)/60i signal input during "COMPONENT" input signal.
Press to select "3:2 PULLDOWN".
Press to set ON/OFF.

XGA MODE

This menu displays when INPUT3 (COMPONENT/RGB) and INPUT4 (PC) signals are selected.
This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling
rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).
Press to select "XGA MODE".
Press to select "AUTO", "1024×768", "1280×768", "1366×768".
AUTO: Automatically selected from 1024×768/1280×768/
Note:
After making this setting, be sure to make each adjustment (such as "AUTO SETUP") on the "POS. /SIZE" menu as
necessary. (see page 22)
1366×768.
Switch the setting to suit the input signal for better
display depends on the angle of view or display
resolution condition.
SET UP for Input Signals
3 : 2 PULLDOWN
XGA MODE
OFF
AUTO
37