Advertisement
CLEANING
• Clean en_]ine, battery, seat, finish, etc.
of all foreign matter.
• Keep finished surfaces and wheels free
of all gasoline, oil, etc.
• Protect painted surfaces with automo-
tive type wax.
Wose do not recommend using a garden
e to clean your tractor unless the elec-
trical system, muffler, air filter and carbure-
tor are covered to keep water out. Water
in engine can result in a shortened engine
life.
,_CAUTION:
Before performing any service or adjustments:
• Depress clutch/brake pedal fully and set parking brake.
• Place motion control lever in neutral (N) position.
• Place attachment
clutch in =DISENGAGED"
position.
Turn ignition key =OFF" and remove key.
i
ake sure the blades and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come
in contact with plug.
TRACTOR
TO REMOVE MOWER
• Place attachment clutch in =DISEN-
GAGED" position.
• Tum height adjustment knob to lowest
setting.
• Lower mower to its lowest position.
• Remove retainer spdng holding anti-
swaybar to chassis bracket and disen-
gage anti-swaybar
from bracket.
• Hemove
retainer springs from suspen-
sion arms at deck and disengage arms
from deck.
• Raise attachment
lift to its highest posi-
tion.
Chassis
Suspension
Uft
Adjustment Links
Nuts
• Remove two retainer springs from each
front link and remove links.
• Slide mower forward and remove belt
from electric clutch pulley.
• Slide mower out from under right side of
tractor.
IMPORTANT: If an attachment other than
the mower deck is to be mounted on the
tractor, remove the front links.
TO INSTALL
MOWER
Follow procedure described
in "INSTALL
MOWER
AND DRIVE BELl" in the
Assembly section of this manual.
Front Mower
Bracket
Front
Suspension
Bracket
Retainer
Springs
Retainer
Spring
Bracket
Anti-Sway
Bar
Spdngs
23
Advertisement
